E60 530i ms45.1 big turbo tune licensing issue

Need help getting started with ByteTuner?
Post Reply
BoostedE60
Posts: 8
Joined: Thu Sep 24, 2020 11:55 pm

E60 530i ms45.1 big turbo tune licensing issue

Post by BoostedE60 »

I finshed a 15psi turbo tune for 70mm to 85mm only
Includes 42lb injectors sap an lower cat delete check engine lite delete max rpm max vehicle speed timing touched up on idle for load of charger maf doubled
Lots of extras done to torque an manifold scales and fuel scales

Gonna release file just need help with my 530i e60 ms45.1 dme im having issues connecting to byte tuner to register license on vehicle so i can finally run the tune i developed over the past 2 years of research

1. I did the wire from hole number 32 on dme second plug from right to left order i then attached it to the obd port hole number 7 but 7 already has a wire occupied so I’m kinda confused i try to jump solder port hole number 7 an 8 together as well as stated and it still can’t generate any info from my modules still please help
Renovelo
Site Admin
Posts: 291
Joined: Thu Aug 08, 2013 7:02 pm

Re: E60 530i ms45.1 big turbo tune licensing issue

Post by Renovelo »

We moved this to a different section of the forum since you're having issues with licensing. Please send us an email (info@renovelo.com) and we'll help get your license issue fixed.
BoostedE60
Posts: 8
Joined: Thu Sep 24, 2020 11:55 pm

Re: E60 530i ms45.1 big turbo tune licensing issue

Post by BoostedE60 »

Thank you i have replied to the info sent and will be waiting for answers
Post Reply