Renovelo Forum

I would like to know how likely it is that the Beat Tuner will add an adjustment table per map sensor to the MS43, this would make the adjustment on power much easier

Unfortunately, there is very little chance we will add support for a MAP sensor in ByteTuner.  It's more challenging than just adding a table to a map pack.  We'd have to develop a custom firmware version for MS43 to estimate engine airflow based on pressure vs. measuring it directly using a MAF sensor. This would take a significant effort for minimal gains.

We have custom firmware which supports MAF sensors up to 2048 kg/hr. Is your setup requiring more airflow than this?

I don't need more than that and just to make the adjustment easier, the maf tables are very complicated, and I wouldn't have to adapt different maf sensors, with the map sensor I could adjust it according to VE