MSS60 V8 M3

Get detailed info on tuning your OBD2 DME
Post Reply
praga
Posts: 2
Joined: Fri Oct 07, 2022 9:43 am

MSS60 V8 M3

Post by praga »

Hello

I hope you are well. Need to change injectors on a V8 M3. Can I change the following maps to scale them ?

1. K_TI_GA
2. KF_TI_SOLL_UB_OFFS
3. KF_TI_SOLL_MIN

Thanks for the help.
Renovelo
Site Admin
Posts: 291
Joined: Thu Aug 08, 2013 7:02 pm

Re: MSS60 V8 M3

Post by Renovelo »

We have these parameters defined in ByteTuner for MSS6x. Yes, if you're changing to different injectors, you'll likely have to modify all three of these parameters.
praga
Posts: 2
Joined: Fri Oct 07, 2022 9:43 am

Re: MSS60 V8 M3

Post by praga »

Great. Only these 3 ? Or did I miss something ?

Is there a list of variables defined for MSS60 on ByteTuner ?

Can Byte Logger logged on MSS60 ?
Renovelo
Site Admin
Posts: 291
Joined: Thu Aug 08, 2013 7:02 pm

Re: MSS60 V8 M3

Post by Renovelo »

You only asked about the original 3 parameters. You will likely have to change other parameters too as injectors are certainly influenced by more than 3 parameters. We don't have experience tuning MSS6x for larger injectors yet, so we can't tell you exactly what needs to be changed. Experiment and report back with what you find.

We've emailed you the list of parameters in our MSS6x map packs.

ByteLogger does not support MSS6x today. As this is a free tool to give users a taste of what ByteTuner has to offer, we haven't updated ByteLogger in a really long time. However, ByteTuner fully supports MSS6x including data logging. You can find a list of all parameters which can be logged by ByteTuner here: viewtopic.php?f=30&t=1793
Post Reply