MSS60 V8 M3

[praga]

Hello

I hope you are well. Need to change injectors on a V8 M3. Can I change the following maps to scale them ?

1. K_TI_GA
2. KF_TI_SOLL_UB_OFFS
3. KF_TI_SOLL_MIN

Thanks for the help.

[Renovelo]

We have these parameters defined in ByteTuner for MSS6x. Yes, if you're changing to different injectors, you'll likely have to modify all three of these parameters.

[praga]

Great. Only these 3 ? Or did I miss something ?

Is there a list of variables defined for MSS60 on ByteTuner ?

Can Byte Logger logged on MSS60 ?

[Renovelo]

You only asked about the original 3 parameters. You will likely have to change other parameters too as injectors are certainly influenced by more than 3 parameters. We don't have experience tuning MSS6x for larger injectors yet, so we can't tell you exactly what needs to be changed. Experiment and report back with what you find.

We've emailed you the list of parameters in our MSS6x map packs.

ByteLogger does not support MSS6x today. As this is a free tool to give users a taste of what ByteTuner has to offer, we haven't updated ByteLogger in a really long time. However, ByteTuner fully supports MSS6x including data logging. You can find a list of all parameters which can be logged by ByteTuner here: viewtopic.php?f=30&t=1793